## 🖨️ Add & Manage Printers

Register each receipt, kitchen, label, kiosk, or event printer, choose how it connects, and assign a print template.

### 📝 Steps
1. Open **MANAGEMENT** → **System Setup**. Under **Printer Setup**, tap **Manage Printers**. The **Printers Setup** list shows each printer name and type.
2. Tap **Add a Printer** (or the pencil on an existing row to open **Edit a Printer**).
3. Enter **Printer Name** and choose **Printer Type**: **Receipt Printer**, **Check Printer**, **Order Printer**, **Kitchen Printer**, **Kiosk Printer**, **Label Printer**, **QR Printer**, **Kitchen KDS**, or **Event Printer**.
4. Choose **Connection Type** and complete the matching fields:
   - **Ethernet** — enter **IP Address**, or tap the search icon to open **Printer List** and tap **Scan Printers**, then pick an IP.
   - **Windows Driver** or **Windows Driver (Built-in)** — choose **Driver Printer Name**.
   - **USB** — choose **USB Device**. If two devices share a serial number, turn on **Use Device Port** and pick **USB Port**.
5. Set **Protocol** (**ESC/POS** or **TSPL**) and a **Template** (required). Set **Print Times** (copies, default `1`), **Retries** (retries after a failed print), and **Print Sequence** (execution order).
6. Set routing:
   - **Linked Terminals** — shown for **Receipt Printer**, **Check Printer**, **QR Printer**, and **Kiosk Printer**. Link the printer to specific terminals before default routing. The list marks **Current**.
   - **Is Not Default** — do not use this printer as the default.
   - **Kitchen Printer** only: **Itemized Print Mode** prints kitchen orders item by item.
   - **Kitchen Printer** and **Order Printer**: **Disable Printing Sequence** prints in entry order; **Disable Cancel Slip Printing** skips cancel / void slips.
7. Tap the green check to save. To remove a printer, tap the red delete on its row and confirm **Are you sure you want to delete this item?**
8. If a **Printing Software** dialog appears — *System detected a printing agent software installed “…” within the same network* — tap **Pair**. Pairing is required before **Windows Driver** printers can print.

> **💡 Tip:** This form has no backup-printer field and no Test Print button. Kitchen, label, cash-drawer, and event *toggles* live under **SETTINGS** — use **Manage Printers** only to register hardware.

---

## 🎬 Video Guide

[Watch Demo Video](https://support.agenteehq.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBdk1DIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--a3f48dcdfeddda31db207dcf4838aec1733c8575/add-manage-printers-EN.mp4)